Since I am still in the testing phase of my BT Fuel Manager, I have decided that connecting it to the 12V battey of the Boat is not a good idea. Once I have everything finished, it would make sense.
So i have used a 9V battery connector and connected it to Vin and Gnd of the Arduino, in order to power it from the battery. OK, there is no on/off switch but that is no problem for now. It is temporary anyways.
Here is a picture of the connector.
So i have used a 9V battery connector and connected it to Vin and Gnd of the Arduino, in order to power it from the battery. OK, there is no on/off switch but that is no problem for now. It is temporary anyways.
Here is a picture of the connector.
No comments:
Post a Comment